HP Desktop PCs - Creating Disc Labels with LightScribe


CyberLink LabelPrint, free and safe download. CyberLink LabelPrint latest version: Design and print your own CD covers. Apr 17, - CD-LabelPrint for Mac is available as a free download on our software library. CD-LabelPrint for Canon is the application software that enables users to easily perform direct printing on DVD/ CD-ROM with a combination of image files and characters. I use another software. CyberLink LabelPrint, Download kostenlos. CyberLink LabelPrint Komfortables Beschriftungswerkzeug für Rohlinge und CD-Hüllen.

LightScribe is a direct disc-labeling technology that provides a simple way to create precise silkscreen-quality labels for discs. All you have to do is burn, flip the disc, and then burn again. A LightScribe-enabled DVD drive uses an optical laser to burn an image into the thin dye coating on the label side of a LightScribe disc. The LightScribe labeling system has no ink to smear, no paper to curl, and no sticky adhesive to cause problems.

LightScribe discs are identified by the LightScribe logo on the retail packaging and on the inner area of the disc itself. LightScribe logo note: Hewlett-Packard's LightScribe website is no longer active. LightScribe software and disc utilities may be found on a number of public websites. Search the Internet for LightScribe to find these pages. If the drive door has the LightScribe name or logo on it, your drive is LightScribe capable.

If the logo or name is missing, your drive is not LightScribe capable. Some LightScribe-enabled slimline drives do not have enough space for a LightScribe logo or name on the drive tray cover, but a LightScribe logo sticker see above should be affixed to all LightScribe enabled computers. In addition, the presence of the disc encoder sensor indicates that a slimline drive is LightScribe enabled. You cannot upgrade your current optical drive to be LightScribe capable. What do I need for LightScribe labeling?

Creating a LightScribe label requires the following four things: A LightScribe enabled drive. LightScribe system software. This is pre-installed on your LightScribe-enabled computer. Labeling software - this is software to create your label content and to send the label image to the LightScribe drive for burning. How long does it take to burn a LightScribe label? The time required varies according to the image mode Draft, Normal, and Best and the surface area setting narrow band with curved text, medium band with curved text, or the full disc surface.

Using Draft or Normal imaging modes provides a shorter burn time, but also results in a lighter label. In most cases, the less area you use, the less time it takes to finish burning the label. When beginning the burning of the label, the LightScribe software provides the estimated amount of time it takes to complete the label.

A progress bar shows the remaining time during the burning process. Where are LightScribe discs sold? Lightscribe media can be purchased from many online shopping sites and from local computer and office supply stores. Can LightScribe burn a color label? Currently, LightScribe technology creates a grayscale image, similar to a black-and-white photograph.

Can I use my computer for other things while I am burning a LightScribe label? LightScribe does not require your attention during the label burning process. You can continue using your computer for other tasks while the label is being burned. Will the LightScribe image fade or darken over time or with exposure to light? LightScribe discs are optimized to ensure that the label surface lasts. Some minor fading may occur over time. To ensure the longest life for both the label and data, keep optical discs out of direct light.

Yes, LightScribe discs are safe to handle, like other optical discs. Can I re-do a LightScribe label? The LightScribe label is permanent and not erasable. While you cannot replace a LightScribe label with a new design, you can add more content to a label that has already been burned.

If you are not using a LightScribe disc, if the LightScribe disc is dirty, or if the LightScribe disc contains updated burning capabilities, you may receive an error when attempting to create a label: This is not a LightScribe disc. Cannot create LightScribe label. LightScribe Engine Error: A communication error has occurred with the LightScribe drive. Please restart your PC and try the label again. Make sure that you are burning labels with gold discs containing the LightScribe logo.

The disc must have a clean surface and be free of smudges especially around the center of the disc. LightScribe logo What happens if I forget to flip the disc over before burning the label?

The LightScribe software notifies you that the disc is not recognized and prompts you to flip the disc over. The disc must be placed label side down in the optical disc tray. What is generic mode printing? Generic printing is a labeling mode you can use to create a label when new LightScribe media is being used without updating the LightScribe system software.

The LightScribe system software can be updated at a later, more convenient time. When using generic mode printing, speed and image quality may not be best. My DVD labels appear faded.

Is there a way to increase Contrast? Using this utility can result in higher contrast, but with longer label burning times. You can also burn the label again. Each successive labeling will darken the blacks and generally produce a better image. When attempting to download the LightScribe system software, nothing happened when I clicked the "update" or "download.

You must have administrator privileges before making system changes to your computer. If you do not have administrative privileges, log onto an account that does have these privileges, or contact someone with administrator privileges to your computer to help you. In some cases, the settings in security software or the Internet browser may interfere when downloading and installing the update.

Temporarily disable anti-virus, spyware, or pop-up blocker programs. Make sure to accept and proceed with any messages that appear. Security software programs typically have small icons in the lower right corner of your desktop, next to the time. Temporarily disabling security software may help.

Right-click the security icon for firewall or antivirus software and select disabled. Remember to re-enable these settings after the update is complete. If the computer is behind a Firewall, check your Firewall security settings before attempting the download or contact the system administrator for directions.

Choose a design that fits your needs. The LightScribe software that came with your computer has a number of pre-designed templates for any occasion. Use your own text, photos, or designs.

Open your favorite graphic design application, create your artwork, and save it in. From your LightScribe software, select the file as a background and complete your label by adding any desired text.

You can add new text and pictures for example, more song names or file names to a previously burned label. Simply load the label design you originally used to burn the label, clear the existing text and graphics to avoid duplicate information being burned, then add the new label information and burn again. Preview your label. To make sure the label is exactly the way you want it, use the Print Preview function if available or print the label out on paper to see it before burning.

Cut down on your label burning time. Switch from Best to Normal mode: Or use the Title or Content templates instead of Full Disc. Because LightScribe burns from the center of the disc to the outside edge in concentric rings, Title and Content templates save time by confining your label to a narrower band.

For the same reason, using circular text instead of straight text can also speed up burn times. Go for contrast. A high-contrast photo or graphic stands out better than a picture in mostly soft middle tones. Keep using your computer.

While the label is being created, you can continue to use your computer for other activities. LightScribe software indicates the time remaining to burn the design. Avoid sudden shock or vibration. While the disc is labeling, avoid any sudden shock or vibration to the computer.

Creating a LightScribe label Burning a label with LightScribe is a separate process from burning data, music, or pictures onto a disc. Depending on the LightScribe software you use, you can create a label before or after you burn files onto the disc.

To burn the label after burning disc content, you must flip the disc over and place it label-side down in the optical drive tray. Labels can be a simple title with a contents list, or you can get more creative by adding backgrounds and images. The following sections provide instructions for creating LightScribe labels.

Download Free Software & Apps

LightScribe is a direct disc-labeling technology that provides a simple way to create precise silkscreen-quality labels for discs. All you have to do is burn, flip the disc, and then burn again. A LightScribe-enabled DVD drive uses an optical laser to burn an image into the thin dye coating on the label side of a LightScribe disc. The LightScribe labeling system has no ink to smear, no paper to curl, and no sticky adhesive to cause problems. LightScribe discs are identified by the LightScribe logo on the retail packaging and on the inner area of the disc itself.

Watch:

CyberLink LabelPrint 2.5 - The Fun Way to Create Stylish Disc Labels

Related Software: Windows 2016 Release Date | Windows 7 Installeren Via Usb